Water Cooled

PAC 3632

Portable Specialty Coolers

PAC 3632

PAC Series Spot Coolers for Permanent or Temporary Cooling Applications

The OceanAire PAC Series are portable air-cooled spot coolers designed for permanent or temporary cooling applications.

The entire portable air conditioning unit has been built in an attractive sheet metal cabinet, equipped with heavy duty casters for mobility.

All PAC models come with a 10-foot power cord for electrical connection and added mobility in service. These spot coolers are designed to direct air to specific areas or objects through a discharge grill located on the upper-front of the unit, while rejecting heat from the top of the unit. Simply roll into place, plug-in the power cord, attach any accessories, and enjoy quick comfortable cooling in minutes!

The PAC models range in cooling capacities from 12,000 BTU/HR to 60,000 BTU/HR to satisfy most space cooling requirements. The PAC is a self-contained unit with the entire cooling system, evaporator and condenser fan motors and electrical components neatly arranged in a gray polyester powder coated metal cabinet.

When connected to the proper source of electrical power, a 24-volt thermostat controls the PAC unit to provide the desired level of comfort and cooling.

A wide variety of accessories and factory installed options are available for the PAC units allowing for improved performance and versatility.

PAC Standard Features

  • 24 Volt Control System with Thermostat
  • Automatic Cooling Mode
  • Manual 2-Speed Fan Control
  • Available in Voltages: 115, 230, 230/3, 460/3
  • Rear Swivel Casters
  • Front Swivel Casters with Brake
  • 10 Foot Power Cord LCDI (Some Models)
  • Washable Air Filters
  • Manual Reset High Pressure Safety Switch
  • Equipped with a Condensate Reservoir Tank
  • 5-Ton Models Equipped with Automatic Condensate Pump
  • Powder Coated 18 Gauge Sheet Metal Cabinet
  • UL Listed (U.S.A. and Canada)
  • Made in the U.S.A.

Accessories Diagram

PAC 3632

Accessories are not included with the unit.

12 inch Hot Inlet Air Plenum
6 inch Drop-In Duct Adapter (replaces cold air grille)
Plug-In Condensate Pump (115v)
4 inch Drop-In Nozzle Kit (replaces cold air grille)
12 inch Hot Duct Kit (8' of 12 inch duct, Ceiling Panel, Duct Flange)
10 inch Cold Air Inlet Plenum

Product Specifications.

Cooling Capacity
@ARI 80ºF-67ºF
 3 Ton - 36,050 BTUH
Width (Inches)  27.50
Depth (Inches)  35.00
Height (Inches)  50.25
Weight (Pounds)  365
Shipping Weight (Pounds)  405
Shipping Volume (Cubic Feet)  40
Power Supply (Volts)  208-230/3
Current Consumption  17.2
Cooling Watts  3620
In rush current (Amps)  93
NEMA Plug Configuration  L15-30P
EER  10.0
Min-max Voltage  187-253
Power Cord Gauge  10/4
Power Cord Length (Feet)  10
Compressor HP  3
Compressor Type Scroll
Compressor LRA  77
Evap (CFM)  1200
Evap Motor HP  1/3
Evap Motor Watts  420
Condenser CFM 1390
Condenser Motor HP  1
Condenser Motor Watts 860
Condensate 5 gal. tank
Sound Level  76
R-410A Charge Oz. 66

Other Products

PAC 1211

1 Ton - 11,800 BTUH

PAC 1811

1.5 Ton - 16,800 BTUH

PAC 2412

2 Ton - 24,020 BTUH

PAC 3612

3 Ton - 36,050 BTUH

PAC 3632

3 Ton - 36,050 BTUH

PAC 3634

3 Ton - 36,050 BTUH

PAC 6012

5 Ton - 60,050 BTUH

PAC 6032

5 Ton - 60,050 BTUH

PAC 6034

5 Ton - 60,050 BTUH